QSC MD-SP218 Manuel d'utilisateur télécharger pdf (Page 15)

TD-000367-01-A

Connect the Loudspeakers

WARNING!:

When the AC Power is on, there is a potential of having

dangerous voltage at the output terminals on the rear of the ampliﬁ er. Use

caution to not touch these contacts. Turn off the AC Mains disconnect switch

prior to making any connections.

1. Turn the AC Mains power switch, on the back of the ampliﬁ er, to OFF.

2. Connect the loudspeaker wiring to the 8-pin Euro-style connector. Refer to Figure 15

thru Figure 23. When combining channels, QSC recommends that you connect jumpers

between the electrically same output terminals. Refer to Figure 15 and the WARNING

above the ﬁ gure.

3. Install the Euro-style connector onto the rear of the ampliﬁ er as shown in Figure 24.

4. Use a Phillips screwdriver to secure the connector.

AC Power On

After connecting the outputs to the loudspeakers, you may turn the ampliﬁ er on.

1. Make sure the output gain settings for all audio-source devices (CD Players, Mixers, Instruments, etc.) at the lowest output (max attenuation).

2. Turn on all audio sources.

3. Turn the AC Mains power switch on the back of the ampliﬁ er to ON. The ampliﬁ er starts in the state it was in when power was removed.

4. You can now bring up the outputs of your audio sources.

Power Distribution Charts

The following charts show the maximum power output for each channel in each conﬁ guration, and under different loads.

CXD 4.3 — Total Power: 2500W

8 Load 4 Load 2 Load

Conﬁ guration

ABCD ABCD ABCD

4 CH (A B C D) 625 625 625 625 650 650 650 650 600 600 600 600

3 CH (AB C D) 1000 625 625 1200 650 650 1200 600 600

3 CH (A+B C D) 1250 625 625 1150 650 650 625 600 600

2 CH (AB CD) 1000 1000 1200 1200 1200 1200

2 CH (AB C+D) 1000 1250 1200 1150 1200 625

2 CH (A+B C+D) 1250 1250 1150 1150 625 625

2 CH Alt (ABC D) 1100 625 2000 650 2500 600

1 CH (ABCD) 1100 2100 2500

1 CH (AB+CD) 2500 2370 2230

— Table 1 —

CXD 4.5 — Total Power: 5000W

8 Load 4 Load 2 Load

Conﬁ guration A B C D A B C D A B C D

4 CH (A B C D) 1150 1150 1150 1150 1250 1250 1250 1250 625 625 625 625

3 CH (AB C D) 1200 1150 1150 2250 1250 1250 2100 625 625

3 CH (A+B C D) 2250 1150 1150 1150 1250 1250 625 625 625

2 CH (AB CD) 1200 1200 2250 2250 2100 2100

2 CH (AB C+D) 1200 2250 2250 1150 2100 625

2 CH (A+B C+D) 2250 2250 1150 1150 625 625

2 CH Alt (ABC D) 1150 1150 2400 1250 4100 625

1 CH (ABCD) 1150 2300 4200

1 CH (AB+CD) 4200 4250 2250

— Table 2 —

— Figure 24 —

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

QSC MD-SP218 Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Haut-parleurs portables QSC MD-SP218